Česky English Pусски Po polsku Deutsch
manufacturer of industrial valves

Floating ball valves – Metal seated

Products >> Floating ball valves >> Metal seated

The ball valves are intended to be used with, for instance, heating gases (natural gas, lighting gas, propane-butane mixture, biogas, coke-oven gas), water, steam (not exceeding +150 °C), oxygen, and both corrosive and non-corrosive liquids and gases in general without mechanical impurities. Ball valves are sealed with rubber rings. The fluids for which the ball valves are designed may contain mechanical impurities – solid particles.

Service temperature range can be from −50 °C to +200 °C depending on combination of body material and sealing rings.

The following ball valves are according to EN standards, but of course there is the possibility to produce ball valve or according to API standards. Feel free to contact our office.

Threaded end ball valve, metal-to-metal KM 9101.X-MD5 - Metal seated

Threaded end ball valve, metal-to-metal
KM 9101.X-MD5

DN 10–100
PN 16–100 (160)

EN standard
full bore, internal thread G or NPT
solid particles: to 0,5 mm


more info
Butt weld end ball valve, metal-to-metal KM 9103.X-MD5 - Metal seated

Butt weld end ball valve, metal-to-metal
KM 9103.X-MD5

DN 10–150
PN 16–100 (160)

EN standard
full bore
solid particles: to 0,5 mm


more info

Wafer-type ball valve, metal-to-metal KM 9107.X-MD5 - Metal seated

Wafer-type ball valve, metal-to-metal
KM 9107.X-MD5

DN 15–150
PN 16–100 (160)

EN standard
full bore
solid particles: to 0,5 mm


more info
Flanged ball valve, metal-to-metal KM 9108.X-MD5 - Metal seated

Flanged ball valve, metal-to-metal
KM 9108.X-MD5

DN 10–150
PN 16–100 (160)

EN standard
full bore
solid particles: to 0,5 mm


more info

Ball valve, metal-to-metal, with springs and floating seats KM 910X.X-MF5 - Metal seated

Ball valve, metal-to-metal, with springs and floating seats
KM 910X.X-MF5

DN 25–100
PN 16–100 (160)

EN standard
full bore
solid particles: to 5 mm


more info

 

© KE-ARM, s.r.o.